We might earn a small income when you click on some of our links.

Working at height is one of the most dangerous profession if the appropriate safety precautions not taken properly. One should be aware that even a drop of a few inches could lead to serious injury.

The organizations using the ladders or scaffolding, must research in order to remove the maximum amount of risk to workers.

It is very important that the organization teach the employees or workers about the basic essentials of safety training. It will help the employees and the employers in addressing every aspect of safety at workplace.

Therefore, the main objective should be an effective safety training to raise the skills of workers and maintain the safety environment at workplace.

You must anticipate protecting the employees every time. Consider the below listed tips if your employees are working at heights.

Top 7 Safety Tips for Work At Heights:

1.  Plan about your work task

Before you start working at height, you should pre-plan each step of the process. Think about; think about emergencies or potential evacuation steps, about fall protection and about any hazards to people on the ground, etc.

2.   Use the right equipment

Always make sure that you have the right equipment always available to complete to fulfill your work safely. Depends on the height, a ladder may be sufficient, but in number of cases a ladder may not be the correct access of equipment for your work. At that time, scaffolding is necessary.

If you want to work at height, or further reach, then you might desire a mobile access tower or powered access equipment. In case, if you do not have this equipment, you should employ the service of it somewhat than make an effort to put up with something that is not steady or strong enough for the work.

3.  Use Rails

When you are able to, use rails.  Passive coverage is the simplest way to keep your staff safe and achieve conformity since there is nothing that they have to do to keep themselves safe (apart from stay within the rails…if your employees are climbing beyond protective rails!).

Rails are designed by the jobsite carpenters or can be pre-fabricated from the manufacturer.  Pre-fabricated railings can easily affixed and is very portable that meet your requirements.  Nevertheless, of which kind you utilize, once set up, you will see rails will be the easiest fall protection system to work with.

4.  Ensure You Understand Fall Distance

You can wear all the fall protection equipment, but if it gives you to hit the low level before it engages, it is pointless.  This might appear to be a “good sense” statement; nevertheless, you would be stunned at just how many people doesn’t seem to be to possess “good sense”.  

It is not unusual to look at a building site or view a maintenance team and visit an employee at 10-12′ off the bottom using a 6′ lanyard with a deceleration device.  While initially you might feel that it will work, but there are number of explanations why it will not.

 First, you have to include 3.5′ of distance to take into account the deployment of your deceleration device.  Already which means the lanyard itself is 9.5′ long.  If you do not are a 6″ high person, this is some rather bad information.  

Your actual street to redemption distance must not only are the amount of your lanyard when deployed, but also the body span below the D-ring and any sag in your funnel and anchor system.

5. Focus on your environment

When you are looking to work at height job, make sure that you concentrate on the neighboring environment.

Make sure that the equipment’s or tools you are using is fully safe and secure where it can be situated, review any access to the requirements, identify risks involved to the people in the job. If there are weak areas of the site, then these should be properly determined and marked.

6.  Carry out regular training

It is important to ensure that employees performing work at heights know about the risks, which are associated with the duty. Ensure regular training get done and relevant licenses are up-to-date.

7.  Use Ladders Properly

Do not believe that because you have a ladder at home, you really know what you are doing.   Actually, the safest way to go on this earth is to believe that you do not really know what you are doing.  Generally, you are going to be right!

Ladders lay at the foundation of many professional and workplace damages. As, ladders are familiar.  You utilize them to hold your lamps, coloring the living room, change that annoying hard to attain high-hat bulb, and clean your gutters.  We utilize them so often that people must really know what we are doing because we have never get hurt before! Well, aside from that onetime you shut the A-frame on your palm.  

Alternatively, that point, the ladder slipped away from under you.  On the other hand, that point you had an instrument in addition ladder that dropped onto you. Ladders are dangerous. When ladders does not get use properly, they are very dangerous.  

Firstly, make sure that ladders will be the easiest way to do for what you are doing, and then ensure that your employees learn how to utilize it.  Until or unless your employees does not know what to identify, employees might not exactly learn how to use an expansion ladder properly.

 You understand that sticker over a stepladder that says, “Don’t stand upon this step or above”.  If you feel that means you can step there but no higher, you will possibly not learn how to use a stepladder.  Provide proper training to your employees in order that they use the various tools in the correct way.

Final Thoughts

Working securely at heights will not come across chance.  It is not something you luck your path into it.  Working safely and securely at heights calls for planning, education, and persistence.  Follow these tips and work safely at height.

Written By
Mats Willman is a Content Writer. He is a specialized in sharing his views about workplace safety. He is keen to aware employees/workers that how they can keep themselves safe and secure while working either at any construction site or in any organization. Although, he does research before writing, to provide the useful information to her readers.

Related Post